www.pumpmalaysia.com.my - Pump Malaysia

BORGER Blueline Rotary Lobe Pumps

Fluid Prowess Sdn. Bhd. 33-2, Jalan Radin Anum, Sri Petaling, 57000 Kuala Lumpur, Wilayah Persekutuan.
0.00 In Stock
Contact Supplier

Product Description:
BLUELINE ROTARY LOBE PUMPS
The high reliability and long service life of the BLUE line Legend rotary lobe pump have convinced our customers for more than 35 years.

The BLUE line Nova is the new generation in the BLUE line series. It is a supplement to our product range and sets new standards.

WIDE VARIETY
15 pump sizes in five series and the large selection of materials and rotors (different geometric designs and materials) allow an individual design of the pump adapted to your application.

CONSTRUCTIVE BENEFITS
• The quick-release cover
- Access to all wetted parts by simply loosening four ring nuts.
• The rotors
- Large selection of high-quality rotors for almost pulsation-free pumping of the medium.
• The casing protection
- Depending on its size, the BLUE line pump is available with and completely without protection plates and liners. When pumping abrasive media containing solids, the protection plates and liners protect the pump casing from wear and can be replaced in a matter of minutes.
• The Oil-filled intermediate chamber
- The oil in the quench chamber cools and lubricates the seals. The intermediate chamber protects the gear unit from pumped medium leaking in if the seal is defective.
• The carrier and timing gear
- High-quality and maintenance-free carrier and timing gear.

ROTARY LOBE PUMPS AT A GLANCE
• Flow variable proportional to pump speed
• High performance with the smallest footprint
• Broad range of materials for all pump components
• Self-priming, pumping in slurp operation
• Gentle pumping of shear-sensitive media
• Ease of maintenance (MIP®)
• Resistant to solids
• Reversible

UNIQUE BLOCK DESIGN
Each rotary lobe pump is equipped with a non-segmented pump and gear casing. This design reflects our high quality standard and guarantees long service life with ease of maintenance.

The pump casing can be manufactured in cast iron, cast steel, stainless steel, duplex steel or Hastelloy®.

VARIETY OF ROTORS
We offer a range of linear and screw rotors differentiated by geometry and material. Whether made of NBR, EPDM, FKM, stainless steel, steel or another material, we offer a suitable rotor for your application. Only single-piece rotors are used – Börger quality down to the last detail.

SEAL SELECTION
Our single- or double-acting mechanical seals are available in different versions and materials. The seals can be replaced very easily through the quick- release cover.

UNIQUE CASING PROTECTION
In order to prevent pump casing damage, e.g. due to abrasive or aggressive fluids, Börger pumps are equipped with casing protection. The unique casing liners and casing protection plates are available in different materials. For conveying pure, non-abrasive media, the Nova series AN, PN and QN are also available as a “clean” version without protection plates and liners.

BLUELINE LEGEND AT A GLANCE
• 15 sizes
• With and without casing protection plates and liners
• Flow rates of 1 – 6,400 gpm (1 – 1,440 m3/h)
• Highest degree of safety due to oil-filled quench chamber as standard
• Large variety of materials for all components of the pump
• A suitable rotor for each application

Pump series
Speed in rpm
Flow rate in us gpm
Max. pressure
Max. temp.

Min.
Max.
Min.
Max.
in psi
in °F
BLUEline Legend PL
1
700
0.5
500
115
to 392
BLUEline Legend CL
1
600
1825
115
to 392
BLUEline Legend FL
1
600
1.51,805
175
to 392
BLUEline Legend EL
1
600
2.74,900
145to 392
BLUEline Legend XL
1
4504.66,335
145to 392


BLUELINE NOVA AT A GLANCE
• With or without casing protection
• Almost pulsation-free, gentle pumping of sensitive media
• Excellent volumetric efficiency thanks to the perfect rotor-casing combination
• Large intermediate chamber for a maximum choice of sealing systems
• Smooth running even at high pressures

Pump SeriesSpeed in rpm
Flow rate in us gpm
Max. pressure
Max. temp.

Min.
Max.
Min.
Max.
in psi
in °F
BLUEline Nova AN
1
800
0.1
155
145
to 392
BLUEline Nova PN
1
800
0.3
340
175
to 392
BLUEline Nova QN
1
6000.6
475
115
to 392


WITH OR COMPLETELY WITHOUT CASING LINING
The BLUE line Nova is available with and completely without protection plates and liners.

The Nova clean has been designed for conveying pure, non-abrasive media. A casing protection is not required. The pump with minimum dead space can be cleaned according to the CIP and SIP hygiene procedures.

For conveying abrasive media containing solids, we have developed the Nova tough. A radial and axial casing protection protects the entire pump casing. The protection plates and liners are perfectly integrated into the pump casing in a flow-optimized design – ensuring excellent efficiency.

03-9056 2468

View Listing

Supplier
Member since 02/28/2019

Contact Supplier