Inoxpa Peristaltic Pump - PV 60 Series

Product Description:
The peristaltic pump is part of the range of positive displacement pumps. Its operating principle is based on pressure from rollers which repeatedly squeeze the hose. The oscillation between compression and decompression of the hose creates a fall in the pressure and thus the continuous suction of the fluid, converting it into a self-suction pump. The impulse is turned into a continuous flow, the rate is directly proportionate to the oscillation speed. The fluid inside the hose is pumped in its integral state, without suffering the slightest damage.

Its main features are:
• Suction up to 8m
• Can be dry run
• Totally sealed, without mechanical locking devices or gaskets
• Excellent dosing accuracy ± 1%
• Flow rate independent from pressure
• Reversible pumping direction
• Easy to clean
• Low noise
• Easy, low-cost maintenance
• Gentle pumping of fluids
• Resistance to abrasion. This equipment is suitable for use in food processing.

Application
The PV pump is a positive displacement peristaltic pump. These pumps are widely used in wineries all year round. They are used for the transfer of wine, must, lees as well as entire or crushed grapes and fermented paste.

Operating Principle
The operating principle is based on progressive pressing and flattening that the rollers apply to the hose. The oscillation between the compression and decompression of the tubular element creates a depression and consequently a continuous suction that converts the pump into a self-priming one. The pump discharges a continuous flow as the flow is directly proportional to the speed. The product is transferred without suffering any damage.

Design and Features
• Self-priming and reversible pump
• Possible dry running
• Total sealing without mechanical seals or gaskets
• Easy maintenance and cleaning
• Gentle treatment of the pumped product
• Connections: DIN 11851
• Pulsation dampening tanks with a separating membrane pressure sensor
• Motor: 3ph, 400V, 50Hz, IP-55
• Gear motor with built-in variable speed drive
• Mechanical gear variable speed drive
• St. trolley, wheels with bearings
• Polyester CE electric panel prepared for connecting the hopper
• Red painted RAL3003

Materials
• Cast Robust Pump Casing: grey GG-22
• Hose: Food grade NR (FDA)
• Parts in Contact with the Product: AISI 304

Document:
Product Leaflets:
https://www.sks-online.com/wp-content/uploads/2015/11/Manual-slangenpomp-PV.pdf